abs c1235 code
#1
08-25-2007, 12:11 AM
abs c1235 code
I have an abs c1235 code on my 99 sts. I looked it up on the internet and it seemed to say that i needed to change my right rear tire speed sensorwhich require the removal and replacement of the hub, but after the hub was replaced i am still getting the same code i am thinking wires has anyone else had this problem? If so i would appreciate some help on this matter i have already cleaned and reconnected the wires. I dont even know where to start with wires though.
#2
08-25-2007, 06:40 PM
RE: abs c1235 code
A wiring problem or a bad EBTCM.
The wires need to be ohm-ed between the EBTCM and the sensor. If that checks out the EBTCM would be the faulty component.
The wires need to be ohm-ed between the EBTCM and the sensor. If that checks out the EBTCM would be the faulty component.
#3
08-29-2007, 03:02 AM
RE: abs c1235 code
do you know which wires i should be looking for on the EBTCM and if you happen to have a chiltons could you tell me if the code i got is correct.
Thread
Thread Starter
Forum
Replies
Last Post
greekrose1986
General Tech
0
01-04-2011 10:03 PM
