1993 Cadillac Allante Northstar 295 HP Engine under $100
93 Cadillac Allante Northstar 295 HP Engine - $95 (Longmont, Co.)Date: 2008-05-15, 9:17AM MDT
This is a 46,000 mile Northstar engine that was removed from my 93 Cadillac Allante because of a bad #7 Crankshaft bearing journal. This engine was not used after the noise from the bearing was detected, thus all other internal parts are in great shape. It was replaced by a new engine, then partially disassembled and all parts put in 4 plastic crates for storage. It was my intention to purchase an aftermarket Crankshaft, new bearings and gaskets, and then rebuild this engine for future use. I have since that time sold the car, and no longer have a use for this engine. Local pickup only! Please call 303-709-6490

.
This is a 46,000 mile Northstar engine that was removed from my 93 Cadillac Allante because of a bad #7 Crankshaft bearing journal. This engine was not used after the noise from the bearing was detected, thus all other internal parts are in great shape. It was replaced by a new engine, then partially disassembled and all parts put in 4 plastic crates for storage. It was my intention to purchase an aftermarket Crankshaft, new bearings and gaskets, and then rebuild this engine for future use. I have since that time sold the car, and no longer have a use for this engine. Local pickup only! Please call 303-709-6490

.
Well, it is my engine now - next winters project - I think turbocharging it will be the way to go.
Great engine - perfectly stored - cylinders as smooth as glass - pistons perfect (except #7 bearing) - timing gears and chains pristine - crankshaft has to go - because of failed bearing - plugs, wires, water pump, everything is there except the starter and engine covers - and I won't need the covers if I turbocharge it.
And for far less than a Ben Franklin...
Woo Hoo - now the hot rod project can really begin...
even I could lift the block

heads look great and so do the holes in the block - shouldn't have to timesert it...


pistons well protected - and very smooth and clean

timing gears and chains look great

bad, bad crankshaft...


bad bearing

miscellaneous parts and covers

engine in plastic tubs...

Great engine - perfectly stored - cylinders as smooth as glass - pistons perfect (except #7 bearing) - timing gears and chains pristine - crankshaft has to go - because of failed bearing - plugs, wires, water pump, everything is there except the starter and engine covers - and I won't need the covers if I turbocharge it.
And for far less than a Ben Franklin...
Woo Hoo - now the hot rod project can really begin...
even I could lift the block

heads look great and so do the holes in the block - shouldn't have to timesert it...


pistons well protected - and very smooth and clean

timing gears and chains look great

bad, bad crankshaft...


bad bearing

miscellaneous parts and covers

engine in plastic tubs...

Thread
Thread Starter
Forum
Replies
Last Post
Stealth
The Allante Pub
1
Oct 9, 2007 09:15 AM




