Remote Control Programming
#1
08-05-2007, 07:59 AM
Remote Control Programming
I replace the front passenger side window and lock operator switch on my 04 ext escalade. Key less entry remotes are not working now. Anyone know how to program them?
Rafael
Puerto Rico
Rafael
Puerto Rico
#2
08-05-2007, 10:16 AM
RE: Remote Control Programming
tire sensors "reporting" the pressures on the DIC?
all doors and windows locked?
aer you sure the work you did realy locks the windows/doors?
the remotes are very picky about everything being locked.
but for programming, you may need the GM Tech scan tool:
plug in the scan tool, punch a couple of buttons, and it's done.
5 minutes.
some cars need that tool, dont know if yours is one of them.
.
all doors and windows locked?
aer you sure the work you did realy locks the windows/doors?
the remotes are very picky about everything being locked.
but for programming, you may need the GM Tech scan tool:
plug in the scan tool, punch a couple of buttons, and it's done.
5 minutes.
some cars need that tool, dont know if yours is one of them.
.
#4
08-05-2007, 03:52 PM
RE: Remote Control Programming
Stealth, the reason why I replaced the part was because I had a "service tire monitor" message. And that problem was resolved with the replacement. The windows and locks work prefect from all the doors controls but the remotes are not doing anything. Any idea how to program without any especial tools?
#7
08-05-2007, 07:44 PM
RE: Remote Control Programming
TSB address these issues.
You need to visit a dealer for a reprogram and possible further diagnosis.
Some customers may comment on any of the following conditions:[align=left]
•
The RKE key fob does not function.[/align][align=left]
•
The "Service Tire Pressure Monitoring System" message is displayed, if equipped.[/align][align=left]
•
The passenger door will not unlock from the passenger's or driver's door switches.[/align][align=left]
•
The passenger door window is inoperative.[/align]
•
The RKE key fob does not function.[/align][align=left]
•
The "Service Tire Pressure Monitoring System" message is displayed, if equipped.[/align][align=left]
•
The passenger door will not unlock from the passenger's or driver's door switches.[/align][align=left]
•
The passenger door window is inoperative.[/align]
#8
08-23-2007, 04:32 PM
RE: Remote Control Programming
The switch your replaced is the control module for all door locks. It is actually the FM reciever for the key fob and tire pressure monitors. if you replaced it you will need to visit a dealer to programm the key fobs to the vehicle and teach in the tire pressure.
Thread
Thread Starter
Forum
Replies
Last Post
