2016 battery change
Thread Starter
|
Junior Member
Joined: Mar 2020
Posts: 3
2016 battery change
Hi all,first off, hello,this is my first post here and I just wanted to say hi!
While changing the dead battery in a 2016 stx how important is it to use a memory saver? The battery has pretty much nothing left. No interior lights, no dash lights.
The battery does however, read 2.4 volts.My question is, Since that is basically dead,will the memory saver work, or have I lost all the settings? And if so, how bad is that?
Thanx for accepting me. And thanx for reading......."T"
While changing the dead battery in a 2016 stx how important is it to use a memory saver? The battery has pretty much nothing left. No interior lights, no dash lights.
The battery does however, read 2.4 volts.My question is, Since that is basically dead,will the memory saver work, or have I lost all the settings? And if so, how bad is that?
Thanx for accepting me. And thanx for reading......."T"
Thread Starter
|
Junior Member
Joined: Mar 2020
Posts: 3
Well folks, it looks like the car is a 2013 not 2016.I changed the battery using the memory saver.Now the car starts and drives but the CUE system is frozen. The radio works with the steering wheel controls.
Any advice on how to fix this would be greatly appreciated
Thanx in advance..."T"...
Any advice on how to fix this would be greatly appreciated
Thanx in advance..."T"...
Thread
Thread Starter
Forum
Replies
Last Post