General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by:

2000 Deville base model no start

Thread Tools
 
Search this Thread
 
  #1  
Old 12-19-2011, 07:42 AM
brianlofton's Avatar
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 12
Default 2000 Deville base model no start

The security light flashes when I try to start the car and there is no sound of a fuel pump and the starter doesn't even try to kick. I have disconnected the battery for fifteen minuites and tried again. I have also tried many combinations of unlocking and locking the doors to include activating the panic button on the key fob. It was fine when I parked it and now de-nada... please help I have work in a few hours...
 
  #2  
Old 12-19-2011, 09:13 AM
brianlofton's Avatar
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 12
Default

it threw a bunch of codes faster than i could write them... pcm p0171 1860 0174 0335 0336 0340 0341... irc v1301 ipm b1004 ipc b1004
 
  #3  
Old 12-19-2011, 09:48 AM
gmtechs's Avatar
Senior Member
Join Date: Aug 2010
Location: Ontario
Posts: 239
Default

right now the problem u r having is the security light, first make sure battery is fully charged and the connection are good
 
  #4  
Old 12-19-2011, 09:50 AM
gmtechs's Avatar
Senior Member
Join Date: Aug 2010
Location: Ontario
Posts: 239
Default

after u do this try to start the car , turn to crank and let key go back to the position as if the car started leave it there for 10- 15 minutes the security light should stop flashing turn off vehicle and then try restarting it
 
  #5  
Old 12-19-2011, 10:45 AM
brianlofton's Avatar
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 12
Default

Ty i will do this now
 
  #6  
Old 12-19-2011, 12:07 PM
brianlofton's Avatar
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 12
Default ok...

Battery was wrong size all together got a new battery and installed... no security light inappropriately but no start... have just started without starting the car and left KO for the 10-15 min you mentioned
 
  #7  
Old 12-19-2011, 12:35 PM
brianlofton's Avatar
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 12
Default

it didn't work
 
  #8  
Old 12-20-2011, 07:30 PM
gmtechs's Avatar
Senior Member
Join Date: Aug 2010
Location: Ontario
Posts: 239
Default

clean all codes
so no security light
when u put key in does it go on then off
 
  #9  
Old 12-20-2011, 07:36 PM
gmtechs's Avatar
Senior Member
Join Date: Aug 2010
Location: Ontario
Posts: 239
Default

if the code b1004 does not leave then module is no good
 
  #10  
Old 12-20-2011, 08:29 PM
brianlofton's Avatar
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 12
Default phew

Ok today I went and got a new key cut... after the three key on key off cycles to program the car to the key, the dash display said "starter disabled" ???
 


Quick Reply: 2000 Deville base model no start



All times are GMT -5. The time now is 05:37 PM.