I have recently pulled the motor and overhauled it because of the heads leaking. I have currently got everything running was getting a p0385 code which I have tracked down to a broken wire, however I did replace both crankshaft sensors. Now I am receiving a p0386 code. does this mean I need to do a relearn procedure on the car, yes i did take the crankshaft out and inspected the bearings. 4.6 northstar engine

 

did u put the sensors in the right spot

 

yes, upper is b yellow/black is signal, yellow ground and light green is hot,
a is lower with yellow/black as ground, light green hot, blue/white is signal. according to manual