1996 Seville Fuel injection hose leak under plenum
#1
1996 Seville Fuel injection hose leak under plenum
My 1996 Seville recently developed a pin hole leak on the fuel injection hose that runs under the manifold plenum. I temporarily sealed it off with a piece of rubber and a small hose clamp. But, obviously the entire hose needs to be replaced. The hose appears to be plastic that was factory installed. Does anyone have any experience replacing this hose? Thanks for any advice.
#4
Thanks for your earlier reply. My car still has the black plastic going to the injectors? Is the recall still in effect? If not, how do I replace the black plastic? It appears to be molded on the injectors somehow. Thanks for additional input.
#5
Thanks for your earlier reply. My repair job has lasted several months, now. My 96 Seville has the black plastic fuel hose running between the injectors. How big of a job is it to replace these hoses? Does anyone make an after market kit?
#6
Thanks for your earlier reply. My repair job has lasted several months, now. My 96 Seville has the black plastic fuel hose running between the injectors. How big of a job is it to replace these hoses? Does anyone make an after market kit?
#10
Another fuel leak on the plastic line
My 1996 STS has suffered another fuel line leak...plastic fuel line coming up from the subframe to the fuel rail bolted to the engine. This time the leak is right where the transmission cable rubs up against the plastic fuel line. What are the replacement options? A repair kit? Or a complete replacement fuel line?
Thread
Thread Starter
Forum
Replies
Last Post
CTSWorkinProgress
Cadillac CTS
1
01-06-2008 10:32 AM