Cadillac PininFarina Allante A joint venture with Coachbuilder PininFarina to design and build the Cadillac two top convertible roadster of the 1980's.

Finding Allanté parts -

Thread Tools
 
Search this Thread
 
Old Apr 23, 2007 | 01:19 PM
  #1  
Stealth's Avatar
Thread Starter
|
Super Moderator
Joined: Feb 2007
Posts: 3,945
Default Finding Allanté parts -

you will find that Cadillac did a few smart things like use standard parts
from other cars. you will find that some parts from MB and Porsche are
the same as those used on the early Allantés.

in the same subject, there are many, many parts in the Allanté fleet that
use the same parts as many many GM models sitting in the salvage yards.
unfortunately, little of that is do***ented in a way that we can easily use it.

my last find? a set of BOSE speakers out of a GM car that are 99.9 %
identical to the "unique" Allanté BOSE 200W system. the difference?
a couple of mounting tabs. cost? $20 each vs Allanté's $150 each.

it was not the other car makers that used Cadillac parts, but Cadillac that
used their parts. IMO, a smart move by Cadillac.




Originator MetroAgt6508

Not an earth-shattering discovery, but perhaps interesting....
I ordered a replacement cigarette lighter for the wife's 87 Mercedes 300E and found that it is an exact duplicate
for the lighter in my 89 Allante. If yours needs replacing, it is much cheaper to get one that fits an 87 Mercedes,
and most likely other years as well, than try to find an "Allanté-specific" lighter.





 
Old Jul 25, 2007 | 12:40 AM
  #2  
Stealth's Avatar
Thread Starter
|
Super Moderator
Joined: Feb 2007
Posts: 3,945
Default $2 Allanté parts

rumor has it that there is a "complete" early Phase II Allante at

U-Pull-It, 5109 Causeway Blvd, Tampa, FL
phone: 813-247-1889


fee to pull is $2.
detail info - CLICK HERE:
Facility Detail Report




 
Old Sep 7, 2007 | 08:11 PM
  #3  
kotty's Avatar
Junior Member
Joined: Sep 2007
Posts: 7
From:
Default RE: Finding Allanté parts -

"it was not the other car makers that used Cadillac parts, but Cadillac that
used their parts. IMO, a smart move by Cadillac.
" Yeah, I agree!!!
Invoking the best ******** and using tomorrow's technologies, Cadillac a brilliant trail into a very bright future..




 
Old Oct 5, 2007 | 04:04 PM
  #4  
Stealth's Avatar
Thread Starter
|
Super Moderator
Joined: Feb 2007
Posts: 3,945
Default RE: Finding Allanté parts -

Cadillac Allante Suspension convert kit






[IMG]local://upfiles/2893/4AB098EB41C043C7B0CDB38BD771AE34.jpg[/IMG]
 
Old Oct 18, 2007 | 10:38 PM
  #5  
jono6406's Avatar
Senior Member
Joined: Oct 2007
Posts: 230
From: Tampa, Florida
Default RE: Finding Allanté parts -

i have been to LKQ in tampa the first week in september and the allante that was there is now GONE lock stock and carcas.
 
Old Nov 14, 2007 | 10:02 AM
  #6  
Hogie's Avatar
Joined: Nov 2007
Posts: 2
Default RE: Finding Allanté parts -

Am looking for the ABS pup relay for a 1987 Allante.
Thanks Dennis.
 
Old Nov 14, 2007 | 12:17 PM
  #7  
G.A.R.Y.'s Avatar
Super Moderator
Joined: Feb 2007
Posts: 1,646
Default RE: Finding Allanté parts -



Try contacting Dick Hussey here:

dhussey@prodigy.net

Tell him Cadillacforum.com sent ya.

You can also reach him here:


allantesource@prodigy.net

Good luck'

G.A.R.Y.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1989 fleetwood
Cadillac Fleetwood
4
May 15, 2008 04:37 PM
Stealth
Private For Sale/Trade Classifieds
0
Feb 4, 2008 08:18 AM
Stealth
Cadillac PininFarina Allante
0
Apr 26, 2007 04:58 PM
Stealth
Private 'Wanted' Classifieds
0
Apr 9, 2007 03:08 PM
prob aller6968
Cadillac Deville
1
Jul 3, 2006 08:51 PM




All times are GMT -5. The time now is 06:23 PM.