Hi All:
Before I start randomly tearing this 95 seville sts northstar down, does the air conditioner compressor come out from the top or bottom. Any tips on this. the bearing went in it.
Thanks
Scott

 

Neither, it's gonna come out side way, through the right wheel well after removing a few splash shields.

 

ok, that's good news!! would you know if it is possible to remove the clutch assembly without disconnecting the lines??

 

You should be able to do it, but prolly need a special "removal tool". A workbench is just so much more comfortable...

 

does the whole clutch and pulley come off as one unit, and shoulkd there be a nut in the center holding the face plate on? because there is not on mine???

 

No nut (there, at least ), it's a key and press-it-on kinda thing.

Yes, the clutch plate and hub assembly comes off as one piece. The installer-remover is one tool (J 33013-B), and you can get/rent one from Auto Parts stores.

 

my 4.5 clutch& pulley are 2 pieces. pulley has snap ring.