General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by:

1970 Deville Convert.

Thread Tools
 
Search this Thread
 
  #1  
Old 04-23-2008, 04:52 PM
stevemarsa's Avatar
Thread Starter
Join Date: Apr 2008
Posts: 2
Default 1970 Deville Convert.

Ive got a 70 deville 2door convert. the pass. side rear quarter window wouldnt go up and down. I tore it apart and diagnosed it and determined that the motor was bad. Does anyone know where I could get a new one or if The motors for the other windows are the same or similar. I cant seem to find a regulator or motor new or even used anywhere.

thanks
Steve
 
  #2  
Old 04-23-2008, 09:23 PM
carnut's Avatar
Tech Certified Members
Join Date: Feb 2008
Posts: 463
Default RE: 1970 Deville Convert.

Right front should be the same. That era of GM cars should be the same Pontiac, Olds, Buick. Try www.hemmingsmotornews.com as well for a supplier or rebuilder. An auto wrecking yard should have a book called Hollander interchange manual to verify cars and years that would interchange.
 
  #3  
Old 04-25-2008, 10:12 PM
slowroll's Avatar
Tech Certified Members
Join Date: Oct 2007
Location: in the mitten
Posts: 3,160
Default RE: 1970 Deville Convert.

Back in the olden days, before techs... mechanics would take the motor end plate off and polish the armature where the brushes ride. Put the motor back together and they usually worked again. As far as motors there are 2 different lengths and were used in to the late 70s. Length can be a concern because of bracing sometimes when using the longer motor.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
classicautoheaven
Member Introduction
3
04-26-2009 06:51 AM
fe427avanti
Aftermarket Cadillac Modifications
1
12-29-2007 03:50 PM
G_NICE
General Tech
1
05-05-2007 10:49 PM
Feffman
Member Introduction
0
11-10-2006 12:32 AM
nwprg
Cadillac Deville
4
02-18-2006 02:41 AM



Quick Reply: 1970 Deville Convert.



All times are GMT -5. The time now is 05:44 PM.