Minimum needed to start engine
Thread Starter
|
Junior Member
Joined: Apr 2009
Posts: 2
From: Racine WI.
Minimum needed to start engine
This is a strange request. I'm building a trike out of a 94 Seville STS Northstar. Can someone help figure what the minimum amount of electronics needed to start the motor. I have a full wiring diagram and a Mitchel on Demand program for all the stock connections. I know many things are not needed in the wiring harness. I just need some help in breaking it down to the bare minimum to start and run this motor. I have a fair understanding of 12v electronics having worked in a repair shop for years. This is my first fuel injected motor. ANY help would be great. Thanks. ALOT.
Super Moderator
Joined: Feb 2007
Posts: 3,945
This is a strange request. I'm building a trike out of a 94 Seville STS Northstar. Can someone help figure what the minimum amount of electronics needed to start the motor. I have a full wiring diagram and a Mitchel on Demand program for all the stock connections. I know many things are not needed in the wiring harness. I just need some help in breaking it down to the bare minimum to start and run this motor. I have a fair understanding of 12v electronics having worked in a repair shop for years. This is my first fuel injected motor. ANY help would be great. Thanks. ALOT.
For sure, at least the ECM and everything that talks to it ?
.
Thread
Thread Starter
Forum
Replies
Last Post
420Deville
General Tech
5
Nov 10, 2007 07:06 PM
leepa05
Cadillac CTS
8
Oct 18, 2006 04:27 PM
