Bumper removal
#1
Bumper removal
Does anyone know or can point me to the procedure for removing a front bumper and left side panel. Not the door panel, the one off of the grille thats 3 ft long that makes up the side engine compartment. I was in a little fender bender and Im replacing the bumper myself.
#5
RE: Bumper removal
Never done one. I've pulled many bumpers and its always a PITA for me. I'm no body man.
Doing it in a scrap yard is even worse in my book.
Sorry to big negative, only suggestion i could give is bring as many tools as you think you may need and some of the ones you may not. I've pulled apart many cars at the scrap yard and a big hammer, something to cut with, big pliers, big flat head as well as all the wrenches and screwdrivers.
I've had to make a return trip a time or two because something unexpected comes up.
I always try and look over a similar car ahead of time to get a feel for whats involved.
Good luck.
Doing it in a scrap yard is even worse in my book.
Sorry to big negative, only suggestion i could give is bring as many tools as you think you may need and some of the ones you may not. I've pulled apart many cars at the scrap yard and a big hammer, something to cut with, big pliers, big flat head as well as all the wrenches and screwdrivers.
I've had to make a return trip a time or two because something unexpected comes up.
I always try and look over a similar car ahead of time to get a feel for whats involved.
Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
caddyjag2000
Cadillac Deville
1
03-27-2006 05:06 PM