Cadillac Deville The flagship luxury car, offering the class with which the Cadillac has been associated, for decades

Blwon Head Gasket

Thread Tools
 
Search this Thread
 
Old Jan 10, 2007 | 04:06 PM
  #1  
misfit6794's Avatar
Thread Starter
Joined: Jan 2007
Posts: 41
Default Blwon Head Gasket

So its a blown head gasket. The car still starts and drives fine, doesnt run rough. What are my options?
 
Old Jan 10, 2007 | 05:39 PM
  #2  
Dave S Texas's Avatar
Senior Member
Joined: Jul 2006
Posts: 114
From: Austin, Texas
Default RE: Blwon Head Gasket

What year model/what engine? Was the cooling system maintained according to Cadillac recommendations, meaning were sealant tabs used? If a bad gasket, it must be replaced....
 
Old Jan 10, 2007 | 07:13 PM
  #3  
misfit6794's Avatar
Thread Starter
Joined: Jan 2007
Posts: 41
Default RE: Blwon Head Gasket

I bought the car only 2 weeks ago, so i'm not sure how well it was maintained. Its a 96 deville with only 82,000 miles. THe coolaant had been flushed and refilled. I've never heard of sealant tabs.
 
Old Jan 10, 2007 | 07:47 PM
  #4  
Dave S Texas's Avatar
Senior Member
Joined: Jul 2006
Posts: 114
From: Austin, Texas
Default RE: Blwon Head Gasket

GM part #3634621...sealant tabs. AC Delco#10-108. A bag of 5 is under $3. These are required for the cooling system each time a flush/fill is performed. You 'might' get away from the gasket problem if you use them...maybe...but anyway they are a requirement.
 
Old Jan 10, 2007 | 08:10 PM
  #5  
WILLIEA's Avatar
Joined: Oct 2006
Posts: 15
Default RE: Blwon Head Gasket

does anybody know if the 03 northstar engine is prone to blow a head gasket or did they remady that problem by then, and does the 03 require those coolant tabs at engine flushes . thanks
 
Old Jan 10, 2007 | 11:55 PM
  #6  
strabo40's Avatar
Member
Joined: Nov 2006
Posts: 31
Default RE: Blwon Head Gasket

When I had the radiator replaced in my '96, I had called Cadillac dealer and asked about the tabs. The service guy told me that they were not necessary. He said that Cadillac put those in when the car came off of the assembly line to help seal the coolant system until the car was broke in.

BTW, I have read where there is a problem with the head bolts on this year of engine and there is a GM service bulletin that tells what is needed to fix the problem. The problem was with the head bolts stripping out of the engine block. So if you are going to replace the head gasket, you might as well check into this to see if it is really a problem.
 
Old Feb 24, 2007 | 04:53 PM
  #7  
Katzmans Caddy's Avatar
Super Moderator
Joined: Dec 2006
Posts: 1,461
From: Toronto, CANADA
Default RE: Blwon Head Gasket

ORIGINAL: WILLIEA

does anybody know if the 03 northstar engine is prone to blow a head gasket or did they remady that problem by then, and does the 03 require those coolant tabs at engine flushes . thanks
In 2000 the compression ratio was lowered to 10:1 to try and address part of the head gasket issue. 2000 and on you are better off.
 
Old Feb 24, 2007 | 04:56 PM
  #8  
Katzmans Caddy's Avatar
Super Moderator
Joined: Dec 2006
Posts: 1,461
From: Toronto, CANADA
Default RE: Blwon Head Gasket

ORIGINAL: strabo40

When I had the radiator replaced in my '96, I had called Cadillac dealer and asked about the tabs. The service guy told me that they were not necessary. He said that Cadillac put those in when the car came off of the assembly line to help seal the coolant system until the car was broke in.

BTW, I have read where there is a problem with the head bolts on this year of engine and there is a GM service bulletin that tells what is needed to fix the problem. The problem was with the head bolts stripping out of the engine block. So if you are going to replace the head gasket, you might as well check into this to see if it is really a problem.
I'd use the sealer anyway. You are right about the bolts that is the main issue with the blown head gaskets. If the gaskets are gone so are the bolts and threads. The repair if around $4,000 at the dealer.
 
Old Jun 4, 2008 | 12:30 AM
  #9  
adixon3's Avatar
Member
Joined: May 2007
Posts: 31
Default RE: Blwon Head Gasket

The head boltsare designed to strip their made of a softer metal so they'll be replaced with new ones when their removed.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
angelgrace58
General Tech
3
Jun 3, 2008 02:24 PM
VIN9
Aluminum Block V8s
2
Sep 19, 2007 09:18 PM
nyblonde2004
General Tech
1
May 18, 2007 10:23 PM
russell1337
General Tech
5
Jul 1, 2006 07:30 AM
Jackie OH
General Tech
1
Jul 22, 2005 09:43 PM




All times are GMT -5. The time now is 04:59 PM.