Vintage & Classic Cadillacs 1902-1977 Cadillac Models

Hi again!

Thread Tools
 
Search this Thread
 
  #1  
Old 01-14-2009, 05:18 AM
76Calais's Avatar
Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 9
Default Hi again!

I am writing again because, by the moment that last time I got some very helpful information here, maybe even this time I might be lucky.
I am looking for some other parts which can not find.
First. The "Qtr panel ext" molding. Part n° 9736349-348. I have never seen this item coming up on ebay, where I mostly buy spares. but could not even find in other places. Looks like if there is no replacement. Or not? Same thing for the bezel molding, which should be basically the same kind of molding. Probably I might find these molding and adapt to my use but...where? Any ideas?
Second. Rear rubber vertical impact strips. Hard to find, too. I have been asking even to some junkyards without any success.
I have never seen these rubber sold as replacement or NOS. Any ideas? (I have tried to contact dBaer but looks like if he is going to sell his activity and there is not an email address in his web site).
Thanks for your attention.
Luca

 
  #2  
Old 01-14-2009, 01:42 PM
brougham1's Avatar
Tech Certified Members
Join Date: Jul 2006
Posts: 424
Default RE: Hi again!

Try www.usapartssupply.com Page 25 in their catalogue.
 
  #3  
Old 01-14-2009, 02:28 PM
76Calais's Avatar
Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 9
Default RE: Hi again!

Hi, thanks for your reply.
I have 2007 usapartssupply catalog but, on page 25, I see just fillers and fender extensions, I just need the mouldings.
 
  #4  
Old 01-14-2009, 07:32 PM
slowroll's Avatar
Tech Certified Members
Join Date: Oct 2007
Location: in the mitten
Posts: 3,160
Default RE: Hi again!

Can you post Pix of what your are looking for? Or better description also 2 or 4 door?
 
  #5  
Old 01-14-2009, 08:37 PM
stomper's Avatar
Tech Certified Members
Join Date: Jun 2007
Posts: 2,701
Default RE: Hi again!

also, did you check out the "Community Services" thread? Specially postings #6 and #7 ?


https://www.cadillacforum.com/m_9880/tm.htm




.
 
  #6  
Old 01-15-2009, 09:25 AM
76Calais's Avatar
Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 9
Default RE: Hi again!

Hi,

thanks a lot for your replies. I gave a look to the topic which stomper mentioned and found many places for spares which I didn't know. Very helpful!

Anyway, here is a pic of the detail I am looking for:
http://i168.photobucket.com/albums/u...r/P1000238.jpg
My problem is knowing the correct name of this molding in order to be able to find it.

Luca
 
  #7  
Old 01-15-2009, 09:53 AM
stomper's Avatar
Tech Certified Members
Join Date: Jun 2007
Posts: 2,701
Default RE: Hi again!

ORIGINAL: 76Calais

Hi,

thanks a lot for your replies. I gave a look to the topic which stomper mentioned and found many places for spares which I didnt know. Very helpful!

Anyway, here is a pic of the detail I am looking for:
http://i168.photobucket.com/albums/u...r/P1000238.jpg
My problem is knowing the correct name of this molding in order to be able to find it.

Luca
our "Community Services" thread remains one of our best kept secrets ...

tail light molding ?


Name:  P1000238.jpg
Views: 55
Size:  85.9 KB
 
  #8  
Old 01-18-2009, 04:18 PM
cadillacdave's Avatar
Member
Join Date: Jun 2008
Location:
Posts: 32
Default RE: Hi again!

you know the last time I bought them was around 90 ,for my 76 convertible I was lucky that I found a cadillac dealer that still had them!!same dealer had1/2 of a parade boot new in the box ,you know sure enough he found me the other 1/2 with the hardware!!!115- each!!!!!!!!you know what that boot is worth today!!!But in answer to your question there was a guy in penn. called teddy holcombe who supposedly bought ALL the u.s cadillac old stock out ,his # and info is probably in hemmings
 
  #9  
Old 01-21-2009, 12:48 AM
76Calais's Avatar
Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 9
Default RE: Hi again!

Thanks a lot. I just got his phone number, looks like if he does not have a web site.
Hope to be able to find these trims!
Luca
 
  #10  
Old 01-21-2009, 08:26 AM
Stealth's Avatar
Super Moderator
Join Date: Feb 2007
Posts: 3,945
Default RE: Hi again!

ORIGINAL: 76Calais

Thanks a lot. I just got his phone number, looks like if he does not have a web site.
Hope to be able to find these trims!
Luca
when you make contact, please invite him to come over and join .. and ..
to list what he has on our classifieds for FREE.




.
 


Quick Reply: Hi again!



All times are GMT -5. The time now is 10:02 AM.