Need to know lug nut size and backspacing
Administrator
Joined: Mar 2005
Posts: 466
RE: Need to know lug nut size and backspacing
i do not know, but neither of those figures are very hard to figure out...just measure from the middle of one lugnut to one not next to it...the number should be something like 5x114 (on my car) and yours should be 5x (whatever you measure).
as for he stock backspacing, it is even easier. take and lay the rim face down, and put a piece of tape from one lip of the rim to the other, and make sure that it is pulled tight...or you can use something long and flat, like a yard stick. then measure from the tape (or yardstick) to the mounting aurface of the rim...that is your offset.
as for he stock backspacing, it is even easier. take and lay the rim face down, and put a piece of tape from one lip of the rim to the other, and make sure that it is pulled tight...or you can use something long and flat, like a yard stick. then measure from the tape (or yardstick) to the mounting aurface of the rim...that is your offset.
Thread
Thread Starter
Forum
Replies
Last Post
