General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

N* coolent change, sealer still needed?

Thread Tools
 
Search this Thread
 
  #1  
Old 11-04-2009, 10:57 AM
rcadblue4's Avatar
Member
Thread Starter
Join Date: Jan 2009
Posts: 43
Default N* coolent change, sealer still needed?

Hi All, Just a quick question about the sealer tablets the older N*'s needed when doing a coolent service. Did they ever fix the issue on the later N*'s? Would an 03 or 06 need them still? Just curious.

thanks
Rcad
 
  #2  
Old 11-04-2009, 10:45 PM
slowroll's Avatar
Tech Certified Members
Join Date: Oct 2007
Location: in the mitten
Posts: 3,160
Default

GM recommends to add the coolant cookies any time coolant is drained. The cookies are supposed to seal minor leaks and lubricate water pump so as to extend its service life. Cookies are NOT TO BE ADDED TO DIESEL COOLING SYSTEM, because they could shorten the service life of water pump. There is a TSB about it. All gasoline engines should have 2 tabs added except Cadillac 4100, 4.5l, and 4.9l which should have 6 tabs (because of its unique construction).
 
  #3  
Old 11-04-2009, 11:37 PM
99STSGUY's Avatar
Senior Member
Join Date: Oct 2008
Location: S.Florida
Posts: 110
Default

So far a N* does that mean add only 2? or do we use all six on the 4.6 motor?
 
  #4  
Old 11-05-2009, 12:42 AM
stomper's Avatar
Tech Certified Members
Join Date: Jun 2007
Posts: 2,701
Default

Originally Posted by 99STSGUY
So far a N* does that mean add only 2? or do we use all six on the 4.6 motor?

as I understand it, all Northstars, all sizes, two tablets ...
4100, 4500, 4900 are not N*'s ... 4600 is of the N* family ...
 

Last edited by stomper; 11-05-2009 at 12:45 AM.
  #5  
Old 11-05-2009, 06:26 AM
99STSGUY's Avatar
Senior Member
Join Date: Oct 2008
Location: S.Florida
Posts: 110
Default

I have some coming in, will be sure to add two.
 
  #6  
Old 11-05-2009, 08:24 AM
stomper's Avatar
Tech Certified Members
Join Date: Jun 2007
Posts: 2,701
Default

Originally Posted by 99STSGUY
I have some coming in, will be sure to add two.


???

i get mine at Big-Lots or Walrmart ... the last time? last summer.
i get the tube granule form instead of the tablet form.

from the FAQ section

https://www.cadillacforum.com/forum/...ead.php?t=2488


.
 

Last edited by stomper; 11-05-2009 at 08:33 AM.
  #7  
Old 11-05-2009, 08:44 AM
rcadblue4's Avatar
Member
Thread Starter
Join Date: Jan 2009
Posts: 43
Default

Thanks for the info. I used the tablets in my 00 DeVille. If I remember right I add them at the lower rad hose...correct?
My 04 is due for a coolent flush and change, I'll add the tabs again.

Rcad
 
  #8  
Old 11-09-2009, 06:33 AM
majbarron's Avatar
Member
Join Date: Oct 2009
Posts: 35
Default

Does it matter where you install the tablets, especially if you definetly have a head gasket leaking.
 
  #9  
Old 11-09-2009, 08:07 AM
stomper's Avatar
Tech Certified Members
Join Date: Jun 2007
Posts: 2,701
Default

Originally Posted by majbarron
Does it matter where you install the tablets, especially if you definitely have a head gasket leaking.

depends on the type of engine.

but if your head gasket leaks, these may not going to solve the problem for long, their function is mainly to deal with any porosity of the castings or small leaks in "cool" areas - headgaskets are for the most part, exposed to very hot areas.

.
 

Last edited by stomper; 11-09-2009 at 08:10 AM.
  #10  
Old 11-09-2009, 09:58 AM
STSevilleSTS's Avatar
Member
Join Date: Feb 2009
Posts: 42
Default

95 seville northstar 4.6 . I used the Bars Leaks tablets, on the package it says use 2 tablets for each gallon of cooling system capacity. I put in all 6 tablets. Remove top hose where it attaches to radiator and install tablets in hose.
 


Quick Reply: N* coolent change, sealer still needed?



All times are GMT -5. The time now is 04:35 AM.