2000 Escalade no start help

Thread Tools
 
Search this Thread
 
  #1  
Old 02-06-2018, 08:11 AM
Escalayed's Avatar
Junior Member
Thread Starter
Join Date: Feb 2018
Posts: 2
Default 2000 Escalade no start help

This is a first for me using forum. I have wrenched on cars for over 30 years as a hobby and necessity at times. 5.7 vortac so far new timing chain and gears new distributor crankshaft position sensor camshaft position sensor engine temperature sensor coil ignition module plugs wires new battery recent fuel pump compression between 148 and 150 fuel pressure at 63 PSI and holding hot Spark getting 4.48 volts to sensor wires this far that's what I know can anybody help me please . my next step call AAA take it to a mechanic? That would hurt so bad "my pride" "my friends would know" the tow truck driver would laugh he's towed so many of my friends cars in here to be fixed. ...
 
  #2  
Old 02-06-2018, 10:20 AM
Omac's Avatar
Junior Member
Join Date: Feb 2018
Location: Boston
Posts: 14
Default

My 2001 Denali would need the security system reset from time to time. It would cause a no start like you described. To reset the system turn the ignition on (lights on dash come on) and leave it on for 10 minutes. Then turn off remove the key. Now try to start the engine.
 
  #3  
Old 02-06-2018, 10:26 AM
Escalayed's Avatar
Junior Member
Thread Starter
Join Date: Feb 2018
Posts: 2
Default

Thank you I'll give it a try seems like I try something else
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gnwosu
Member Introduction
4
09-27-2016 05:25 AM
Kristine Buckman
Cadillac Seville
0
03-16-2016 07:33 PM
qstorm
General Tech
3
04-14-2011 07:42 PM
8yroldlac
Cadillac Escalade
5
01-01-2009 06:15 PM
nyintheca
Cadillac STS
6
01-17-2008 09:46 PM



Quick Reply: 2000 Escalade no start help



All times are GMT -5. The time now is 10:01 PM.