mods?

Printable Version

Cadillac >> Cadillac Models >> Cadillac Escalade >> mods?

Page: [1]

Login Message << Older Topic   Newer Topic >>

mods? - 1/2/2006 10:45:29 AM    VetteViperGuy   Posts: 126 Joined: 12/12/2005 Status: offline Anyone done any performance mods on their Escalade? Post #: 1

RE: mods? - 1/19/2006 7:28:29 AM    CTS 2.8L   Posts: 6 Joined: 10/13/2005 Status: offline i wish that i own an Escalade to answer you :D (in reply to VetteViperGuy) Post #: 2

RE: mods? - 6/24/2006 9:25:59 PM    SoFlaBuell   Posts: 2 Joined: 6/23/2006 Status: offline Not performance, but got the Autoventshade in channels, theya re nice, and do a great job at keeping the lines clean. Got a Husky liner for the rear, and like it also. K&N next.... (in reply to CTS 2.8L) Post #: 3

RE: mods? - 7/3/2006 11:11:35 PM    tsloan71   Posts: 5 Joined: 7/3/2006 Status: offline Well since you guys are newbies to the Escalade...J/K I'm a 2000 Owner Old school but ...Purfect condition. I have installed cold air intake. A true cold air with force air feed intake from under front air dam at the tow hitch area. SpeedMod chip. Borla exhaust. LIVE WIRE and HOT FIRE ig. I had 22" TIS on it but have since come to my senses and reduced down to 20" <--For all you newbies to the 20"+ wheels size the bigger you go the more wear on your suspension. I know all you lads that say BIGGGER>>>ETC. Well you'll soon figure out BIGGER means $$$$$ to go fast for every inch over OEM you go means MINUS 12-19hp PER WHEEL you do the math. I know 24" and 26" look great but if you pull up next to a Yukon rollin on 20" and your on 24" you better have 500-600HP to move that monster cause it only takes 420HP on 20" to shoot ya down the local drag @ 111.7 @ 11.43. So guys horsepower take money here's my break down 2000 Escalade stock 265HP Cold air with force feed air= 17hp ECU CHIP = 45hp Borla with streets cats =26hp LIVE WIRES = 8 hp HOT FIRE ig =12hp Carbon fiber hood =65lbs weight reduction@ 373hp=about +6hp=379hp Now my new project is a B&M blower which is around 110hp. But I have new forged pistons to add for this type add on if not I'll fry the OME pistons all together I'll be pushing around 500 hp with all mods finished and a extra 100hp with a Nitro shot But like I said power takes cash you CAN NOT add serious power with out money and cold air intakes will NOT produce power to the wheel unless it is a force feed system DYNO's show the proof don't fall for K&N and other type intakes for power looks...o.k. Power NO. (in reply to SoFlaBuell) Post #: 4

RE: mods? - 7/4/2006 8:55:52 AM    FLCaddytech Posts: 507 Joined: 6/22/2006 Status: offline I don't want to sound argumentative here, but........ I have to call B.S. on this one. Unless you are talking about an 11 sec 1/4 in another vehicle like a vette or blown cts-v. It's cool you are into modding your truck, but your H/P and ET claims are a bit unrealistic. I'm all for boosting that sucker, and if you are going to change pistons, what a great chance to drop the compression and run an intercooled set up. Now you are talking about handling 10+ psi. Thats where the power is at. Tranny life with an 'Slade running low 13's will be short but fun. Enjoy and good luck. (in reply to tsloan71) Post #: 5

RE: mods? - 7/4/2006 10:08:25 PM    tsloan71   Posts: 5 Joined: 7/3/2006 Status: offline Boosting..... NO..My friend I know all you guys with your Vetts and such who love your twin turbo's and such but NOTHING...I mean NOTHING beats a belt driven blower. As far as 11's in the 1/4.. Capital drag see's lifted F350 super duties with the Banks power packs smoke vetts and such....There's a BIG difference in "tuning" a vett you drive everyday and "prostreet". I don't drive mine everyday it's been retired to my prostreet itch and is my project to make people go "why' did you do that to an Escalade (in reply to FLCaddytech) Post #: 6

RE: mods? - 8/27/2006 3:01:37 PM    Shoeb   Posts: 6 Joined: 8/3/2006 Status: offline talkin performance. on my 02 i got a custom hand molded quad exhaust system and a vortec air intake. thats it but from what they told me those 2 together boosted my hp by 105. i dunno for sure seeing as how i cant dyno it due to the awd so i keep it a bit realistic and say around 400+. 450 sounds better though lol. _____________________________ Shoeb M. (in reply to tsloan71) Post #: 7

RE: mods? - 10/15/2006 12:28:54 AM    kevinknapp1978   Posts: 3 Joined: 10/15/2006 Status: offline i have a 2002 escalade sedan 4dr,6.0 v8 AWD, i have 24 inch chrome echelon wheels wrapped in 305/35/24 kumho tires,k&n air intake,custom exhaust, and JET chip...stainless steel bullbar,HID 8000k headlights,LED taillights,tinted windows,5 lcd screens,(2)kicker L7 15 inch subs,kicker ZR600 amp,full woodgrain dash kit...i currently have 176000 miles on it and add roughly 300 daily, ive only replaced the waterpump, the tranny @ 145k, and now my air suspension went out, other than those i have no problems and love the vehicle (in reply to VetteViperGuy) Post #: 8

RE: mods? - 10/18/2006 3:56:38 PM    ctd3cadillac   Posts: 55 Joined: 7/10/2006 Status: offline Hello, If you are still interested in modifying your Escalade please take a look at our web site. www.d3cadillac.com. Please fill free to give us a call if you have any questions. Escalade http://www.d3cadillac.com/PDF/STS_Pr...806_images.pdf Thank You, _____________________________ C.T. D3 Research & Design www.d3cadillac.com Cadillac Performance & Styling Specialists 562-988-2090 (in reply to kevinknapp1978) Post #: 9

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Cadillac Prices

Top 10 Posters
stealth 2999 g.a.r.y. 1639 stomper 1447 katzmans cad 1268 slowroll 1254 rickyd 615 flcaddytech 507 patrick 405 brougham1 385 hyperion 375

New Vendors
Sportwing
Magnaflow
MagnaFlow Performance Exhaust