engine swap

Cadillac Forum Cadillac Classifieds Photo Gallery Member List Calendars Search Contact CF Sponsors
Cadillac News Forum FAQ Cadillac Timeslips Cadillac Recalls TSBs Register Login

engine swap

Printable Version

Cadillac >> General Technical Section >> Engine Specific >> Small Block V8s >> engine swap

Page: [1]

Message

<< Older Topic Newer Topic >>

engine swap - 7/2/2008 11:32:22 AM

thelittledrummerboyc

Posts: 3
Score: 0
Joined: 7/2/2008
Status: offline

I am wanting to swap the stock 5.0 engine in my 1988 Cadillac Brougham D''elegance for a 350. Any tips or pointers? How much should I expect to have to spend on this? Anyone have a good used 350 for sale?

< Message edited by thelittledrummerboyc -- 7/2/2008 11:44:03 AM >

Post #: 1

RE: engine swap - 7/2/2008 12:58:53 PM

Katzmans Caddy

Posts: 1145
Score: 0
Joined: 12/3/2006
Status: offline

Is that 5.0 a Chevy or Olds ? I think it is an Olds 307 so you should look for an Olds 350, what the heck look for an Olds 455!

(in reply to thelittledrummerboyc)

Post #: 2

RE: engine swap - 7/2/2008 1:26:05 PM

thelittledrummerboyc

Posts: 3
Score: 0
Joined: 7/2/2008
Status: offline

Would a 455 fit? If it would fit, thats what I will do. Lol, i complain about gas now.

(in reply to Katzmans Caddy)

Post #: 3

RE: engine swap - 7/2/2008 3:10:04 PM

G.A.R.Y.

Posts: 1627
Score: 0
Joined: 2/18/2007
Status: offline

what about a crate motor?

_____________________________

occ
z06
93 allantesold
sts maybe in December

(in reply to thelittledrummerboyc)

Post #: 4

RE: engine swap - 7/2/2008 7:01:59 PM

Katzmans Caddy

Posts: 1145
Score: 0
Joined: 12/3/2006
Status: offline

quote:

ORIGINAL: G.A.R.Y.

what about a crate motor?

GM crates are all Chevy so he would need a new transmission, Two patterns Chevy and BOP I believe.

As far as 455 goes I am not an Olds expert but I believe the 307, 350 and the 403 share the block while the 455 is out there with teh 425. There is no noticeable difference in physical size. The 403 is a good motor too and would be a straight bolt in. Remember that Pontiac used this in the Trans Am and some Can Am''''s.

< Message edited by Katzmans Caddy -- 7/3/2008 7:01:22 AM >

(in reply to G.A.R.Y.)

Post #: 5

RE: engine swap - 7/3/2008 4:41:58 AM

thelittledrummerboyc

Posts: 3
Score: 0
Joined: 7/2/2008
Status: offline

A 403 would bolt right in? Hmmmm. Thats interesting. I might just do that. I want a little more pep then what my 5.0 is giving me. I really appreciate the help guys, i will have to try to find a 403 then.

(in reply to Katzmans Caddy)

Post #: 6

RE: engine swap - 7/3/2008 6:50:45 AM

Katzmans Caddy

Posts: 1145
Score: 0
Joined: 12/3/2006
Status: offline

Yes a far as I know the 403 swap for a 307 is common among Olds guys. Both are Olds small blocks and the 455 is a big block. Other Olds small blocks are the 330 and 350. The 403 was rated at 185 HP in most applications but it does have a lot of torque, 320 ft lb at 2000 rpm. For comparison, the Y code Cadillac Northstar has 275 HP and 300 ft lb torque and while Oldsmobile used several different ratings on the 307 over the years generally the engine was rated at 140 net horsepower and 240 ft lb of torque. Torque is what you feel so it would be a big improvement for you.

(in reply to thelittledrummerboyc)

Post #: 7