deville stalls-no codes

Cadillac Forum Cadillac Classifieds Photo Gallery Member List Calendars Search Contact CF Sponsors
Cadillac News Forum FAQ Cadillac Timeslips Cadillac Recalls TSBs Register Login

deville stalls-no codes

Printable Version

Cadillac >> Cadillac Models >> Cadillac Deville >> deville stalls-no codes

Page: [1]

Message

<< Older Topic Newer Topic >>

deville stalls-no codes - 6/30/2008 1:17:54 AM

jaymit

Posts: 3
Joined: 6/23/2008
Status: offline

have a 03 deville (33K miles) that keeps stalling...read a lot of info here that it might be the crankshaft sensors, but I have no codes on my computer, so the dealership can''t figure it out either. If the sensors do go out do they always leave a code? Cause most of the posts I see about the same thing all have codes. Any info would be good. Thanks.

Post #: 1

RE: deville stalls-no codes - 6/30/2008 6:47:30 AM

Katzmans Caddy

Posts: 1268
Joined: 12/3/2006
Status: offline

Here''s a simple one, when was the fuel filter changed last? Probably you don''t know which means it 5 years old. There are so many impurities in gasoline these days I''d make sure it is not clogged up.

(in reply to jaymit)

Post #: 2

RE: deville stalls-no codes - 7/2/2008 12:14:43 AM

jaymit

Posts: 3
Joined: 6/23/2008
Status: offline

so if the fuel filter was clogged would that not leave a code on the computer? Will check into that, thanks for the tip.

(in reply to jaymit)

Post #: 3

RE: deville stalls-no codes - 7/2/2008 7:44:07 AM

Katzmans Caddy

Posts: 1268
Joined: 12/3/2006
Status: offline

quote:

ORIGINAL: jaymit

so if the fuel filter was clogged would that not leave a code on the computer? Will check into that, thanks for the tip.

Would not necessarily code.

(in reply to jaymit)

Post #: 4

RE: deville stalls-no codes - 8/8/2008 3:31:03 PM

jaymit

Posts: 3
Joined: 6/23/2008
Status: offline

I hope this solves the mystery...computer finally spit some codes out. P0385, P0386, P1372. Turns out was the crankshaft sensors, had extended warranty and they replaced. Just picked it up today so no chance to see if it dies again. Will probably go and change the filters too. Thanks again.

(in reply to jaymit)

Post #: 5