ELDORADO BLINKER/UNDERDASH WIRING DIAGRAM
Login | |
|
|
|
|
|
|
|
RE: ELDORADO BLINKER/UNDERDASH WIRING DIAGRAM - 4/19/2008 5:19:11 PM
|
|
|
NAFTA
 Posts: 180
Joined: 2/11/2008 Status: offline
|
yeah its what i was thinking to, i just wanted to see if anyone knew the wirecodes instead of me testing every wire, thanks tho im going to do that anyways now
|
|
|
|
RE: ELDORADO BLINKER/UNDERDASH WIRING DIAGRAM - 4/19/2008 10:08:28 PM
|
|
|
jerrymac
Posts: 55
Joined: 4/6/2008 Status: offline
|
Just remember that the front and rears are seperate curcuits. If you back probe wires with turn signal on, you will get 2 wires flashing the test light. To determine if you are probing front or rear, shut the turn signal off and push the brake pedal, if the test light glows steady, you are probing the rear turns/brake lights. Also, I am sure you probly already know , don't probe any air bag wiring, which is usually a bright yellow connector, or you might damage airbag module , or accidently inflate airbag.
|
|
|
|
RE: ELDORADO BLINKER/UNDERDASH WIRING DIAGRAM - 4/20/2008 9:58:29 AM
|
|
|
NAFTA
 Posts: 180
Joined: 2/11/2008 Status: offline
|
I'm not going to do it with a test light, I'll probably use my multimeter, put the black to ground and test with the positive. Now that you mention it I gotta lay low when I probe them because of the air bag.
|
|
|
|
|