|
brougham1 -> RE: Loss of power and only 12 mpg? (4/17/2008 1:36:35 PM)
|
O.K. here we go, code 24 is the speed sensor cuircuit, possible failure. Code 30 is the Idle Speed Control cuircuit. Code 45 is the O2 sensor is rich. 45 is most likely a bad O2 sensor and they are easy to change. If you want to do it yourself you will need an O2 sensor socket to do the job. The socket is about $12 and it has a side cut out of it to accomodate the sensor wires so they are not damaged. Before doing the job just check all the wires and make sure the connections are good and the wires are sound and not broken or cracked. There is a possiblility that with these kind of problems that the ECM may be at fault. That was the case on my 81 and a reman unit was around $170. For the code 30 there is a sequence of test to determine if the ISC is functioning properly so let me know if you intend to try the work yourself , have been over this many times on mine. Code 24 could be a number of things too, defective speed sensor, defective buffer amplifier, defective wires or terminals, ECM not processing siganl, a speedo not functioning. Many diagnostic steps on this one too. Good luck and keep us posted.
|
|
|
|