|
carnut -> RE: Climate Control Quit (4/16/2008 11:03:54 AM)
|
This climate control system had a habit of melting the connector at the plug in at the control head. If I remember the large diamter orange wire. To verify you must pull the dash control head out from the dash to inspect the multi wire plug at it rear. If its melted, sometimes you can cut that wire out of the plug and connect it directly to the head. another thing these would do is melt the connector at the hi fan relay. Same scenerio, cut the wires out of their harness and plug them directly into the relay. Dont remember where the relay bank is, but I think behind the glove box? Do you have a factory service manual? I assume you have already put 12 volts to the blower motor to verify it works?
|
|
|
|
