|
slowroll -> RE: 500 ci ???? (11/29/2007 4:52:34 PM)
|
429,472,& 500 cad engines are front -Eldo, towards the front everything else. Late 70s 425 and 6.0l(368) should be rear sump. Balancer - Take pulley off, Cadillac did not used bolt to retain balancer till late 80s-early 90s. You can use bolt grip type puller to remove it, but you need something to protect end of crank. To install it, balancer installer is recommend over board and a hammer. Use 1962 balancer bolt and torque to 120 ft-lb,then remove bolt and install cork. I think bolt is 9/16 NF about 1 1/4 long
|
|
|
|