General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by:

No injector pulse???? Please help

Thread Tools
 
Search this Thread
 
  #1  
Old 04-22-2014, 11:41 PM
jarid224's Avatar
Junior Member
Thread Starter
Join Date: Apr 2014
Posts: 6
Default No injector pulse???? Please help

I have a 1996 Cadillac Deville base. It has good fuel pressure and spark. I have 12volts at injectors but seems my pcm is not sending the enable injector signal..... The dic says theft system problem/may not restart. Vehicle cranks and can be started with starting fluid or i can ground injectors and they will all spray fuel. the vats system is bypassed with the pellet resistor soldered in. It does have an aftermarket radio the purples are looped to trick computer to think it is still there. Please help I have looked and looked and tried everything I can think of. I would really like to see a tdm/bcm/ipc bypass of some sort i can fab up or get semi cheap.
 
  #2  
Old 04-23-2014, 08:32 PM
slowroll's Avatar
Tech Certified Members
Join Date: Oct 2007
Location: in the mitten
Posts: 3,160
Default

Codes ? Did car start since bypass? With message on DIC it seems to be related to pass key.
 
  #3  
Old 04-23-2014, 10:42 PM
jarid224's Avatar
Junior Member
Thread Starter
Join Date: Apr 2014
Posts: 6
Default

I will have to get the codes tomorrow I know one of them was ip2750 I dont know where to find the code info. yes it was my friends a while back and he did the chip bypass and drove it for a long time. It was at the shop and they lost the keys... it has been rekeyed by a locksmith and the battery has died and that is when it quit wanting to start. I have tried the 30 min relearn and no luck. Tried the dic universal theft deterrent over ride got one flash with my noid light after that then nothing.
 

Last edited by jarid224; 04-23-2014 at 10:46 PM.
  #4  
Old 04-24-2014, 01:37 PM
jarid224's Avatar
Junior Member
Thread Starter
Join Date: Apr 2014
Posts: 6
Default

There is no irc data? Do I need to get the interface or a oem stereo to get it to run
 
  #5  
Old 04-24-2014, 06:41 PM
slowroll's Avatar
Tech Certified Members
Join Date: Oct 2007
Location: in the mitten
Posts: 3,160
Default

the codes will come up on dic. The radio shouldn't matter. If you press off and warmer buttons the codes will display. IRC data relates to oem radio
 
  #6  
Old 04-25-2014, 09:36 AM
jarid224's Avatar
Junior Member
Thread Starter
Join Date: Apr 2014
Posts: 6
Default

Pc1406 c
Pc1631 h
Ip1552 h
Ip2750 c
Sd1061 h
Sd1062 h
Tc0033 c
Pz1558 h
Rf2560 h
 
  #7  
Old 04-26-2014, 01:59 PM
jarid224's Avatar
Junior Member
Thread Starter
Join Date: Apr 2014
Posts: 6
Default

What do you think?
 
  #8  
Old 04-27-2014, 11:08 AM
slowroll's Avatar
Tech Certified Members
Join Date: Oct 2007
Location: in the mitten
Posts: 3,160
Default

p1631 theft deterrent code incorrect. I would recheck vats bypass. IPC 2750 is also vats code.
 
  #9  
Old 04-27-2014, 04:27 PM
jarid224's Avatar
Junior Member
Thread Starter
Join Date: Apr 2014
Posts: 6
Default

Do you have a wire diagram to check volts and hertz at the bcm?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kcarlasc
Cadillac Seville
2
12-20-2008 10:18 AM
Cadillac Al
General Tech
7
11-30-2008 02:56 PM
peace707
Cadillac STS
0
12-07-2006 10:37 PM
attaboy
Cadillac Seville
0
11-22-2006 08:26 PM
cookie
Private 'Wanted' Classifieds
0
10-04-2006 03:01 AM



Quick Reply: No injector pulse???? Please help



All times are GMT -5. The time now is 12:58 AM.