Cadillac Deville The flagship luxury car, offering the class with which the Cadillac has been associated, for decades

A/C Actuator Calibration???

  #1  
Old 05-14-2011, 10:00 AM
Primo55's Avatar
Junior Member
Thread Starter
Join Date: Mar 2011
Posts: 12
Default A/C Actuator Calibration???

have a 2003 deville..ONly issue was A/C would not flow thru dash on every try.it would work every now and then..found that it was the actuator on drivers side..bought and replaced xactly as i removed it..NOW air flow is completely OFF! most flow is thru the defrost,very low at dash and bottom..after calling a few places i was told i had to calibrate the whole A/C system..i know i bought the rite part,got the original at the Chevy dealer..i have NO idea how to calibrate the A/C system!! cant find any post online for a 2003 deville with this issue..Any and ALL advice is greatly appreciated,Thanks -
 
  #2  
Old 05-14-2011, 12:08 PM
gmtechs's Avatar
Senior Member
Join Date: Aug 2010
Location: Ontario
Posts: 239
Default

just disconnect the battery voltage wait 2 min
reconnect

clear all codes
should be good after that
 

Last edited by gmtechs; 05-14-2011 at 12:11 PM.
  #3  
Old 05-14-2011, 04:36 PM
Primo55's Avatar
Junior Member
Thread Starter
Join Date: Mar 2011
Posts: 12
Default

just tried it,disconected the power on main battery under back seat,waited for about three minutes..and same results..Been askin around,been told it needs calibrating,will that fix it or r they just trying to get more $ out of me??other mechanic said that on the ac panel on dash u push three at the same time and that resets it...whAT DO U GUYS THINK??? tHANKS.
 
  #4  
Old 05-15-2011, 05:12 PM
gmtechs's Avatar
Senior Member
Join Date: Aug 2010
Location: Ontario
Posts: 239
Default

Service Information
  1. Turn OFF the ignition.
  2. Remove the battery positive voltage circuit fuse of the Instrument Panel Control Module. Important

    The module memory will not clear if the battery positive voltage circuit fuse is installed in less than 60 seconds.

  3. Wait 60 seconds.
  4. Install the fuse.
 
  #5  
Old 05-16-2011, 08:14 PM
Primo55's Avatar
Junior Member
Thread Starter
Join Date: Mar 2011
Posts: 12
Default

Where is the INstrument Panel Control MOdule located??? thanks for all the help!
 
  #6  
Old 05-17-2011, 07:54 AM
gmtechs's Avatar
Senior Member
Join Date: Aug 2010
Location: Ontario
Posts: 239
Default

the dash is the ipc module (gauges) the fuse is under the hood label should be IP 10a fuse
 
  #7  
Old 05-19-2011, 05:31 PM
Primo55's Avatar
Junior Member
Thread Starter
Join Date: Mar 2011
Posts: 12
Default

Thanks for all the help!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hales
Cadillac Deville
1
08-05-2020 02:41 PM
nobde
Cadillac Deville
1
03-07-2010 07:32 AM
jono6406
Private For Sale/Trade Classifieds
0
08-07-2008 06:07 PM
halesassoc
General Tech
1
02-04-2008 06:16 PM
coocadi
Cadillac Fleetwood
0
12-13-2007 03:26 PM


Thread Tools
Search this Thread
Quick Reply: A/C Actuator Calibration???



All times are GMT -5. The time now is 02:53 PM.