Stealth
4/23/2007 11:19:43 AM
you will find that Cadillac did a few smart things like use standard parts
from other cars. you will find that some parts from MB and Porsche are
the same as those used on the early Allantés.
in the same subject, there are many, many parts in the Allanté fleet that
use the same parts as many many GM models sitting in the salvage yards.
unfortunately, little of that is documented in a way that we can easily use it.
my last find? a set of BOSE speakers out of a GM car that are 99.9 %
identical to the "unique" Allanté BOSE 200W system. the difference?
a couple of mounting tabs. cost? $20 each vs Allanté's $150 each.
it was not the other car makers that used Cadillac parts, but Cadillac that
used their parts. IMO, a smart move by Cadillac. quote:
Originator MetroAgt6508
Not an earth-shattering discovery, but perhaps interesting....
I ordered a replacement cigarette lighter for the wife's 87 Mercedes 300E and found that it is an exact duplicate
for the lighter in my 89 Allante. If yours needs replacing, it is much cheaper to get one that fits an 87 Mercedes,
and most likely other years as well, than try to find an "Allanté-specific" lighter.
Stealth
7/24/2007 10:40:49 PM
rumor has it that there is a "complete" early Phase II Allante at
U-Pull-It, 5109 Causeway Blvd, Tampa, FL
phone: 813-247-1889
fee to pull is $2.
detail info - CLICK HERE:
Facility Detail Report
kotty
9/7/2007 6:11:41 PM
"it was not the other car makers that used Cadillac parts, but Cadillac that
used their parts. IMO, a smart move by Cadillac. " Yeah, I agree!!!
Invoking the best ******** and using tomorrow's technologies, Cadillac a brilliant trail into a very bright future..
***** SPAM ****
by Glenda Bermundo
Stealth
10/5/2007 2:04:06 PM
Cadillac Allante Suspension convert kit
Thumbnail Image
jono6406
10/18/2007 8:38:28 PM
i have been to LKQ in tampa the first week in september and the allante that was there is now GONE lock stock and carcas.
Hogie
11/14/2007 8:03:00 AM
Am looking for the ABS pup relay for a 1987 Allante.
Thanks Dennis.
G.A.R.Y.
11/14/2007 10:17:04 AM