adixon3
7/27/2008 3:20:31 AM
I had a blown head gasket on my 99 deville N* engine so i replaced it with a N* engine from a 2000 deville but the problem is i can''t get the ac to work correctly every time i try to put it in auto it switches to econ. i had the mechanic that installed the engine check the system and it was full of freon but the ac clutch is not getting any power going to it. Do I need to replace the 99 PCM to a 2000 PCM because of the new engine so everything is recognized works correctly or is there something else that needs to be done?
carnut
7/27/2008 1:24:52 PM
My first thought is there are A/C fault codes in the BCM. Enter diagnostics and erase all codes. report back
adixon3
7/30/2008 12:45:40 PM
I cleared all the codes and the ac still does not work
slowroll
7/30/2008 5:32:05 PM
You will need to check the basics, something disconnected, fuse(s), etc. There are alot of electrical items under black plastic cover near left front strut tower. I would start there.